Grain Systems PNEG-546 - Manual (Page 23)

Chapter 4: Rear Access Ladder
Installing the Ladder Standoff Brackets to the Rear Ladder Support
Brackets
The ladder standoff brackets allow the ladder to be easily adjusted and secured to the dryer.
1. Install the ladder standoff brackets (A) to the lower rear ladder support bracket (D), using carriage
bolts (B) and flange nuts (C).
2. Install the ladder standoff brackets (A) to the upper rear ladder support brackets (E), using carriage
bolts (B) and flange nuts (C).
3. Install the ladder to standoff brackets, (see Installing the Ladder to the Ladder Standoff Brackets,
page 18 ).
4. Install the end caps to the ends of the ladder, (see Installing the End Cap to the Ladder, page 18 ).
Figure 4-2 Installing the ladder standoff bracket to rear ladder support bracket
Callout Part number Description
A LDR-4341 Standoff bracket
B S-3550 0.3125 in. x 1 in. carriage bolt
C S-3611 0.3125 in. - 18 grade 2 flange nut
D D01–2692 Lower rear ladder bracket
E D01–2691 Upper rear ladder bracket