Inlet box assembly instructions (continued) – Grain Systems PNEG-361 User Manual
Page 14
Advertising
2. Assembly Instructions
14
PNEG-361 Heat Reclaimer for Single Module Dryers
Inlet Box Assembly Instructions (Continued)
5. Assemble access door angles (D51-0159) with inlet box bottom panel (D51-0137).
Assemble combination of access door (D51-0160) and peak cap handle (PR-331) with access door
angles (D51-0159).
Assemble combination of clamp bracket (D01-0862) and clamp (D01-0652) with inlet box bottom
panel (D51-0137).
Figure 2E
Advertising