Inlet box assembly instructions (continued) – Grain Systems PNEG-361 User Manual
Page 20
Advertising
![background image](/manuals/277576/20/background.png)
2. Assembly Instructions
20
PNEG-361 Heat Reclaimer for Single Module Dryers
Inlet Box Assembly Instructions (Continued)
11. Front surface brace (D01-2827), top hole assemble with front support angle (D51-0153) and bottom
hole assemble with fan support base.
NOTE: Inlet box bottom panel cover
(D01-2811) is not used.
Figure 2K
Advertising