Inlet box assembly instructions (continued) – Grain Systems PNEG-361 User Manual
Page 15
Advertising
2. Assembly Instructions
PNEG-361 Heat Reclaimer for Single Module Dryers
15
Inlet Box Assembly Instructions (Continued)
6. Assemble combination of R.H. and L.H. inlet box front panel (D51-0144 and D51-0230) with inlet box
bottom panel (D51-0137).
Assemble two (2) front panel angles (D51-0161) with R.H. and L.H. inlet box front panel (D51-0144
and D51-0230).
Assemble front support angle (D51-0153) with inlet box bottom panel (D51-0137).
Figure 2F
Advertising