Grain Systems PNEG-338 - Manual (Page 10)

3. Safety Alert Decals
10 PNEG-338 Portable Dryer Installation and Towing
Moving parts can crush
and cut. Keep hands
clear. Do not operate
without guards in place.
Failure to do so could
result in serious injury.
DC-972
DC-974
Rotating auger will crush
and cut. Auto equipment
can start at anytime. Do not
enter until electric power is
locked in off position. Failure
to do so will result in serious
injury or death.
WARNING!
Automatically controlled
belt drive can start at
anytime. Keep hands
clear. Failure to do so
could result in serious
injury.
DC-971
Decal: DC-972
Decal DC-972 is located on the bottom auger belt guard and the front bearing plate (which
is visible when the bottom auger belt guard is removed). An alternate location would be at
the rear of the dryer for portable dryers equipped with the Front Discharge Option.
Decal: DC-971
Decal DC-971 is located on the bottom auger belt guard and the front bearing plate (which
is visible when the bottom auger belt guard is removed). An alternate location would be at
the rear of the dryer for portable dryers equipped with the Front Discharge Option.
An additional location for decal DC-971 is the top auger belt guard (one on the belt
guard cover and one inside on the belt guard body visible when the belt guard cover
is removed).
Decal: DC-974
Decal DC-974 has several different locations. Two (2) are located on the front end panel
below the fan/heater. Two (2) are located on the rear end panel below the rear access
door. Two (2) are located on the auger discharge box (one on the outside top and one on
the inside of the flapper lid next to the discharge mercury switch). One more of these
decals is located inside the plenum on the rear plenum closure door just inside the rear
access door.