Grain Systems PNEG-950 - Manual (Page 10)

PNEG-950 10
WARNING! BE ALERT!
Personnel operating or working around
electric fans should read this manual.
This manual must be delivered with the
equipment to its owner. Failure to read
this manual and its safety instructions is
a misuse of the equipment.
The symbol shown is used to call
your attention to instructions con-
cerning your personal safety. Watch
for this symbol; it points out impor-
tant safety precautions. It means "AT-
TENTION", "WARNING", "CAU-
TION", and "DANGER". Read the
message and be cautious to the
possibility of personal injury or
death.
SAFETY ALERT SYMBOL
DRYER OPERATION
Thank you for choosing a GSI product. It is designed to give excellent performance and service for many
years.
This manual describes the operation and service for all standard 100 Series single fan grain dryers.
These models are available for liquid propane or natural gas fuel supply, with either single phase 230 volt, or
three phase 220 or 440 volt electrical power.
The principal concern of the GSI Group, Inc. ("GSI") is your safety and the safety of others associated with grain
handling equipment. This manual is written to help you understand safe operating procedures, and some of the
problems that may be encountered by the operator or other personnel.
As owner and/or operator, it is your responsibility to know what requirements, hazards and precautions exist,
and to inform all personnel associated with the equipment, or who are in the dryer area. Avoid any alterations to
the equipment. Such alterations may produce a very dangerous situation, where serious injury or death may
occur.
EMERGENCY STOP
Decal: DC-1317
The emergency stop switch is located on the
lower control box on the upper right hand side
and is labeled with decal DC-1317. Pushing
the emergency stop switch will interrupt the
control power and stop all dryer functions.
WARNING: Pushing the emergency
stop switch does not interrupt the
main power to the upper control
box panel.