Grain Systems PNEG-950 - Manual (Page 12)

PNEG-950 12
Decal: DC-972
Decal: DC-971
Decal: DC-974
Decal DC-972 is located on the bottom auger belt
guard and the front bearing plate (which is visible when
then bottom auger belt guard is removed). An alternate
location would be at the rear of the dryer for portable dryers
equipped with the Front Discharge Option.
Decal DC-971 is located on the bottom auger belt
guard and the front bearing plate (which is visible when
then bottom auger belt guard is removed). An alternate
location would be at the rear of the dryer for portable dryers
equipped with the Front Discharge Option.
Another location for decal DC-971 is the top auger belt
guard (one on the belt guard cover and one inside on the
belt guard body visible when the belt guard cover is re-
move).
Decal DC-974 has several different locations. Two are
located on the front end panel below the fan/heater. Two
are located on the rear end panel below the rear access
door. Two are located on the auger discharge box (one on
the outside top and one on the inside of the flapper lid next
to the discharge mercury switch). One more of these de-
cals is located inside the plenum on the rear plenum clo-
sure door just inside the rear access door.