Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-681 - Manual (Page 4)

4 PNEG-681 Series II Bucket Elevator
1. Introduction
Thank you for choosing a GSI product. It has been designed to provide excellent performance and service
for many years.
This manual covers general information about installing the GSI Bucket Elevator.
Due to the large variety of equipment features offered, this manual cannot cover every aspect of
installation with this manual. This manual provides suggested and recommended methods for installing
the product. GSI recommends you retain a qualified contractor to provide on-site expertise.
GSI is not responsible for the installation of this product.
General Safety Statements
1. Our primary concern is your safety and the safety of others associated with the use of this product.
All personnel responsible for installing, operating or maintaining this equipment should read and
understand this manual. It is the responsibility of the owner to make this manual available to the
person or persons involved with this equipment.
2. Guards and safety labels have been installed prior to leaving the manufacturing plant. These should
not to be removed, altered or defaced in any way.
3. Modifications to equipment may cause extremely dangerous situations that could result in damage
to the equipment as well as serious injury or death. Never modify the equipment.
4. GSI recommends that you contact the local power company to have a representative survey the
installation to ensure wiring is compatible with their system and adequate power is supplied to
the unit.
Receiving Inspection
1. Carefully inspect the shipment for damage as soon as it is received and verify that the quantity of
parts or packages actually received corresponds to the quantity shown on the packing slip.
2. Report any discrepancies, shortages or damages to the delivering carrier as soon as possible.
3. The manufacturer’s responsibility for damage to the equipment ends when the carrier accepts the
equipment for delivery. Refer to the bill of lading for more detailed information.
4. Save all paperwork and documentation furnished with any of the elevator components.
Pre-Installation Notifications
1. GSI is the manufacturer and vendor of the elevator and is responsible only for the optional
accessories also manufactured by GSI.
2. This installation manual should be used for reference only.
3. The owner/user/installer of this equipment is responsible for consulting and retaining a civil or
structural engineer regarding the design, construction and supervision of the entire installation,
including the elevator foundation and the guying cable and/or bracing system.
4. GSI Bucket Elevators are designed to be vertically self-supporting when erected but must be
supported or guyed against wind loads.