Assembling purlin number 6, Chapter 7: roof assembly – Grain Systems Tanks PNEG-4105A User Manual
Page 92
Advertising
![background image](/manuals/277607/92/background.png)
Figure 7-14 Purlin location 7
A
Left-hand roof rafter (CTR-0446)
F
1/2 x 1-3/4 in. flange bolt (S-10252)
B
1/2 x 1-3/4 in. flange bolt (S-10252)
G
1/2 in. flange nut (S-10253)
C
Right-hand roof rafter (CTR-0446)
H
Purlin (CTR-0453)
D
Right purlin clip (CTR-0100)
I
1/2 in. flange nut (S-10253)
E
Left purlin clip (CTR-0099)
Assembling Purlin Number 6
Purlin number 6 is located sixth purlin from the eave.
Before You Begin
Place two roof rafters on the ground with roof panel holes facing up. Several A-frame assemblies will have
X-bracing installed and be placed periodically throughout the perimeter of the roof. Determine if X-bracing
is being installed and note those steps in this procedure.
92
Pneg-4105A 105 Ft Diameter 40-Series Bin
Advertising