Installation instructions – Grain Systems Bin Flooring PNEG-1324 User Manual
Page 19
Advertising
3. Installation
PNEG-1324 72', 75', 78', 90' and 105' Cor-Lok and Cut-Lok Flooring
19
Installation Instructions
1. When a splice is needed, plank length A as described in the floor manual should be installed
alongside plank length B.
2. The under-splice should then be installed under the split of plank A and B. The splice should extend
3" under each plank. The splice should be screwed in place as shown in
.
3. This process will be repeated for all plank locations requiring a splice.
Figure 3D
Advertising