Grain Systems PNEG-1781 - Manual (Page 8)

3. Installation
8 PNEG-1781 Field Installation of Sidekick™ Moisture Sampler Kit
Installing the Sidekick™ Moisture Sampler Kit
1. Begin installation by attaching the new discharge auger with flappers (D04-0586) onto the auger stub
under the rear wooden hanger bearing.
2. Next, install the rear auger stub at the other end of the discharge auger. (See Figure 3B.)
Figure 3B
3. The new rear discharge with moisture sampler can now be bolted in the same location as the
previous sampler using eight (8) bolts.