Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1813 - Manual (Page 32)

4. Operation Procedures
32 PNEG-1813 Electronic Distributor Control
Main Screen
Depending on the number of spouts in the current configuration, one of the following screens will be
displayed.
(See Figure 4B, Figure 4C, Figure 4D and Figure 4E.) The name of the current spout is
indicated at the top of the screen and is indicated in the graphic with a green circle. At the bottom of the
screen are three (3) buttons to navigate to either the Help Menu, Move Screen or Setup Menu.
Figure 4B Four (4) Spout Main Screen
Figure 4C Six (6) Spout Main Screen
Figure 4D Eight (8) Spout Main Screen
Figure 4E Ten (10) Spout Main Screen
CURRENT SPOUT SELECTION:
BIN 1
CURRENT SPOUT SELECTION:
BIN 1
CURRENT SPOUT SELECTION:
BIN 1
CURRENT SPOUT SELECTION:
BIN 1