Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1813 - Manual (Page 43)

4. Operation Procedures
PNEG-1813 Electronic Distributor Control 43
Homing Interval Screen
The homing interval screen allows the user to set the number of times the distributor position may be
moved before a warning displays for home position re-calibration. The lower value of this number, the
greater the positioning accuracy. A default value of 50 is standard.
(See Figure 4T.)
Figure 4T Homing Interval Screen
Setting Homing Interval
1. To access the homing interval from the “Setup Menu”, select “Homing Interval” to display the “Homing
Interval” setup screen.
2. Press the button under the “Homing Interval” label. A number keypad will display. (See Figure 4U.)
Figure 4U
3. Insert the desired value and press “enter”.
4. Select “OK” to apply changes and return to “Main Menu”.