Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1813 - Manual (Page 40)

4. Operation Procedures
40 PNEG-1813 Electronic Distributor Control
Position Locations Screen
This screen allows the user to adjust the spout positioning so it lines up with the center of the distributor
discharge. Adjustments can be made individually or an offset can be used to adjust all spouts by the same
amount.
(See Figure 4P.)
Figure 4P Modify Spout Positioning
Modify Spout Positioning
1. From the “Setup Menu”, select “Position Locations” to bring up the “Modify Spout Positioning” screen.
2. In the “Modify Spout Positioning” screen select the spout that requires adjustment by touching the
value pad next to the spout number balloon. A number keypad will display. (See Figure 4Q.)
Figure 4Q Number Keypad