Grain Systems Bin Accessories PNEG-066 - Manual (Page 9)

9 PNEG-066 2.66" & 4.00" Side Draw Installation
2.66" Side Draw Systems
Field cutting of chutes is neces-
sary to except the wind rings.
Locate wind rings as shown. The
wind ring must be assembled in to
a complete ring and penetrate
through the chute. Field drill
stiffeners for attachment bracket.
(IF REQUIRED)
2 & 3 Post (Internally Stiffened)
NOTE: Unload tubes and
supports from rack & pinion
not provided by G.S.I.
8th RING FROM
TANK BASE
7th HORIZONTAL SEAM
FROM TANK BASE
7th RING FROM
TANK BASE
28" TYP.
(71.12 cm)
15" TYP.
(38.10 cm)
CHUTE
6th HORIZONTAL SEAM
FROM TANK BASE
8" (20.32 cm)
45°
12-3/4" TYP.
(32.39 cm)
6th RING FROM TANK BASE
SIDE DRAW PLATE
DETAIL "D"
4-5/16" (10.95 cm)
6" DIA. (15.24 cm)
2-3/4" DIA. (6.99 cm)
STIFFENER
CHUTE
DETAIL "B"
FIELD DRILL SIDEWALL
TO MATCH CHUTE.
(7/16" DIA. HOLES)
FIRST HORIZONTAL SEAM
FROM EAVE
STARTING LOCATION: 2nd
INSIDE CORRUGATION OF
THE 2nd RING
INSIDE OF BIN
4" TYP.
(10.16 cm)
CHUTE
DETAIL "A"
8" TYP. (20.32 cm)