Platform and safety cage package – Grain Systems Bin Accessories PNEG-1773 User Manual
Page 26
Advertising
4. Assembly Instructions
26
PNEG-1773 42'-135' “X” Series Ladder, Cage and Platform
Platform and Safety Cage Package
10. Attach the ladder flare to the ladder using 5/16" hardware. You must drill the bottom hole through the
ladder and use 5/16" hardware.
11. Attach the narrow safety cage bracket, cage hoops and cage splice brackets to the ladder flares and
platform posts. This must all be assembled at the same time using 5/16" hardware.
NOTE: Be sure the ladder flares are vertical and parallel to the platform posts by adjusting the
splice brackets. The ladder will NOT be square to the platform due to the radius of the
bin. The side closest to the bin wall will be closer to the platform.
Figure 4L
Advertising