Grain Systems Bin Accessories PNEG-1773 - Manual (Page 64)

4. Assembly Instructions
64 PNEG-1773 42'-135' “X” Series Ladder, Cage and Platform
“X” Series Sidedraw Ladder Platform Package
Platform Package
1. Attach the wall angle to the sidewall sheet with 3/8" hardware. Assemble the left and right
intermediate platform brackets to the wall angles with 3/8" hardware. (See Figure 4AR.)
NOTE: Leave all hardware loose until completely assembled.
Assemble the platform to the front and back angles and platform brackets using the 5/16" truss bolts.
Using 5/16" hardware, assemble ladder sidewall angle to intermediate platform bracket.
Figure 4AR