Legs and leg bracing, Chapter 13 legs and leg bracing, Tank legs and leg braces – Grain Systems Tanks PNEG-1460 User Manual
Page 68
Advertising
68
PNEG-1460 6', 7' and 9' Bulk Feed Tank BFT Series and GHT Series
13. Legs and Leg Bracing
Tank Legs and Leg Braces
When installing legs to sidewall, reverse the normal insertion procedure for bolts. Place hex head and
neoprene washer to inside of sidewall, leaving threaded portion of bolt protruding outward. This provides
for a weather-tight seal at the leg attachment location.
for leg attachment to sidewall
sheet details.
Figure 13A
Use 5/16" x 1" bin bolts and nuts when attaching the leg to base. Make sure the washer is used on the slot
side of the leg.
Figure 13B
Ref #
Part #
Description
A
BLK-10057
Back Leg Anchor Plate (One Tab)
B
BLK-10058
Front Leg Anchor Plate (Two (2) Tabs)
Leg
Advertising