Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1727 User Manual
Instructions, Chain loop torque arm repair kit
Advertising
Date: 09-27-10
PNEG-1727
Instructions
1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421
PNEG-1727
Page 1 of 4
Printed in the U.S.A.
Copyright © 2010 by GSI Group
www.gsiag.com
Chain Loop Torque Arm Repair Kit
NOTE: Motor mount and belt guard removed for clarity.
Attach both torque plate assemblies to each side of the gear reducer using the bolts provided. Re-use the
lock washer and hex nut provided with the gear reducer.
NOTE: Leave the hardware loose to allow for ease of assembly.
TA3 - 3/8"-16 Bolt
TA4 and TA5 - 1/2"-13 Bolt
Figure 1
Secure the motor mount from both sides to prevent the drive unit from pivoting
either direction on the shaft.
Advertising
Table of contents