Chain loop torque arm repair kit – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1727 User Manual
Page 2
Advertising
Page 2 of 4
PNEG-1727
Chain Loop Torque Arm Repair Kit
Place the C-clamp bracket to the back side of the square tubing.
Figure 2
Place the torque plate anchor bracket between the torque plate assemblies and attach it to the C-clamp
using the 3/8"-16 hardware.
NOTE: Leave the hardware loose to allow for ease of assembly.
Figure 3
Advertising