Grain Systems PNEG-824 - Manual (Page 6)

6
Series 2000 Downwind Heater
SAFETY
SAFETY FIRST
General Safety Statements
The GSI Group Inc’s Principal concern is
your safety and the safety of others associated with
grain handling equipment. We want to keep you
as a customer. This manual is to help you under-
stand safe operating procedures and some prob-
lems which may be encountered by the operator
and other personnel.
As owner and/or operator, it is your respon-
sibility to know what requirements, hazards and
precautions exist and inform all personnel associ-
ated with, or in the area of the product. Safety
precautions may be required from the personnel.
This product is ideal for the conditioning of corn,
soy beans or other select grains. Avoid any alter-
ation to the equipment, such alterations may pro-
duce a very dangerous situation, where serious in-
jury or death may occur.
If a decal is damaged or missing contact:
The GSI Group Inc.
1004 E. Illinois St.
Assumption, IL 62510
217-226-4421
A free replacement will be sent to you.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury
WARNING indicates a potentially hazardous situation
which , if not avoided, could result in death or serious
injury.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
CAUTION used without the safety alert symbol indi-
cates a potentially hazardous situation which, if not
avoided, may result in property damage.
BE ALERT!
Danger!
Personnel operating or
working around electrical
equipment should read this
manual. This manual must be delivered with
equipment to its owner. Failure to read this
manual and its safety instructions is a misuse
of the equipment.
CAUTION
CAUTION
WARNING
DANGER
This is the safety alert symbol.
It is used to alert you to poten-
tial personal injury hazards.
Obey all safety messages that
follow this symbol to avoid possible in-
jury or death.
The GSI Group Inc. recommends that you
contact your local power company and have a rep-
resentative review your installation so your wir-
ing will be compatible with their system and so
that you will have adequate power supplied to your
unit.