Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-679 - Manual (Page 15)

Bucket Elevator
15
Front and Rear Mounting Channels
The next step is to attach the front and rear support
channel to the platform corner posts as show
below.
1. 1/2"-13 x 1" Hex Bolt
2. 1/2"-13 Hex Nut
3. Front Support Channel:
30" & 36" Bucket Elevator
RSP36005
See page 22, 23
42" & 48" Bucket Elevator
RSP48005
See page 24, 25
4. Rear Mounting Channel:
30" & 36" Bucket Elevator
RSP36206
See page 22, 23
42" & 48" Bucket Elevator
RSP48206
See page 24, 25