Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-679 - Manual (Page 7)

Bucket Elevator
7
Ladder Attachment
2
3
4
1
1. 1/2”-13x1” Hex Bolt
2. 1/2”-13 Hex Nut
3. 10’ Ladder Section** (10foot)
4. 27” Safety Cage Hoop (27hoop)
** NOTE: A ten foot section is used at anytime the ladder continues on to another section of ladder.
A fourteen foot section is used anytime the ladder extends through any platform deck.
When attaching the ladder to the standoffs the ladder is attached
through the second hole down front the end of the ladder.
The first hole is for the safety cage hoop to attach through.