Center support channel – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-679 User Manual
Page 16
Advertising
Bucket Elevator
16
To complete the support frame bolt on the center
support channel to the front and rear support chan-
nel.
**This setup shows a left side step off. For a right side step off rotate the middle support channel and shift the floor plate.
Center Support Channel
1. 1/2"-13 x 1" Hex Bolt
2. 1/2"-13 Hex Nut
3. Center Support Channel:**
30" , 36", 42" Bucket Elevator
RSP48204
See page 24, 25
Advertising