Grain Systems PNEG-588 - Manual (Page 4)

4
Deluxe Centrifugal Heater
SAFETY
Roof Damage Warning And Disclaimer
WARNING! BE ALERT!
Personnel operating or working around
electric fans should read this manual.
This manual must be delivered with the
equipment to its owner. Failure to read
this manual and its safety instructions is
a misuse of the equipment.
The symbol shown is used to call
your attention to instructions con-
cerning your personal safety. Watch
for this symbol; it points out impor-
tant safety precautions. It means
"ATTENTION", "WARNING",
"CAUTION", and "DANGER".
Read the message and be cautious
to the possibility of personal injury
or death.
Safety Alert Symbol
Thank you for choosing a GSI product. It is de-
signed to give excellent performance and service
for many years.
This manual describes the operation of the De-
luxe Downwind Centrifugal Heater. It is designed for
low to medium temperature grain conditioning, and is
ideal for the aeration of rice, popcorn or other select
grains. It is available in both propane vapor and natural
gas models.
The principal concern of GSI is your safety and
the safety of others associated with grain handling
As owner and/or operator, it is your responsi-
bility to know what requirements, hazards and pre-
cautions exist, and to inform all personnel associ-
ated with the equipment, or who are in the area.
Avoid any alterations to the equipment. Such alter-
ations may produce a very dangerous situation,
where serious injury or death may occur.
Heater Operation
GSI DOES NOT WARRANT ANY ROOF DAMAGE CAUSED
BY EXCESSIVE VACUUM OR INTERNAL PRESSURE FROM
FANS OR OTHER AIR MOVING SYSTEMS. ADEQUATE VEN-
TILATION AND/OR "MAKEUP AIR" DEVICES SHOULD BE
PROVIDED FOR ALL POWERED AIR HANDLING SYSTEMS.
GSI DOES NOT RECOMMEND THE USE OF DOWNWARD
FLOW SYSTEMS (SUCTION). SEVERE ROOF DAMAGE CAN
RESULT FROM ANY BLOCKAGE OF AIR PASSAGES. RUN-
NING FANS DURING HIGH HUMIDITY/COLD WEATHER
CONDITIONS CAN CAUSE AIR EXHAUST OR INTAKE PORTS
TO FREEZE.
equipment. This manual is written to help you un-
derstand safe operating procedures, and some of the
problems that may be encountered by the operator
or other personnel.