Grain Systems Bin Accessories PNEG-1652 - Manual (Page 15)

3. Inside Ladder Instructions
PNEG-1652 Reinforced Inside Ladder Instructions 15
4.00'' Commercial Stiffened
Figure 3I Inside Starter Bracket and Ladder Placement
NOTE: Be sure to push ladder sections up and tighten. Do not tighten ladder section splices with ladder
sections hanging under their own weight.
Now all standoff brackets and straps must be installed every 44" and attached to each 4' section required.
Figure 3J Un-Assembled Reinforcing Strap Figure 3K Assembled Reinforcing Strap