Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1295 - Manual (Page 10)

10 PNEG-1295 16" - 36" Platform
4. 16"- 24" PLATFORM ASSEMBLY
Decking
The drive deck and hatch deck sections are interchangeable. All shown views are consistent for
a right hand drive elevator. If you are assembling a left hand drive elevator the hatch deck would
be closest to you and the drive deck farthest in
Figure 4B . Place outside floor sections
(Drive Attach) on support channels in location shown below and fasten using 3/8" x 1" carriage
bolts and whiz nuts. Fasten mid drive deck to the two outside floor sections with 3/8" x 1" bolts
and whiz nuts. Make sure not to tighten the hardware until assembly is complete.
Figure 4B 24" Platform
Figure 4C 16" Platform
Deck, 16/14" Mid Drive
(HP1624MDD)
Deck, 16/24" Drive
(HP1624DD)
Deck, 16/24"
Hatch (HP1624HD)
Deck, 16/14" Mid
Drive (HP1624MDD)
Deck, 16/24" Drive
(HP1624DD)
Deck, 16/24"
Hatch (HP1624HD)
Bracket, 16/24"
HP Adapter
(HP1624AB)