Handrails, 6 x 6 distributor platform – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1295 User Manual
Page 42
Advertising
42
PNEG-1295 16" - 36" Platform
9. 6 X 6 DISTRIBUTOR PLATFORM
Handrails
Locate the toe board cover plate (DSP36001) and bolt over the unused notched toe board area.
Attach handrail posts to the toe boards as shown using the 5/16" hardware provided. (Leave
hardware loose until all handrails are in place). Attach all handrail angles and brace angle.
After all pieces have been attached go back and tighten all hardware.
below for part numbers and lengths of all handrails.
Figure 9E
Model Size
Handrail
DSP36009 - 51.1/2"
Handrail
DSP36010 - 74.7/8"
Handrail
DSP36011 - 74"
Post
DSP36012 - 43.1/2"
Brace
DSP36013 - 37.3/4"
Advertising