Support channels & knee braces, 4 x 5 distributor platform – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1295 User Manual
Page 34
Advertising
34
PNEG-1295 16" - 36" Platform
8. 4 X 5 DISTRIBUTOR PLATFORM
Support Channels & Knee Braces
With clamps fastened securely to the trunk, attach the platform support channels to the middle
clamp, use 1/2" hardware with this assembly. The knee braces will attach in the upper set of
holes on side of support channel and to the lower clamp. Attach knee brace diagonals to bottom
side of knee braces. Before tightening hardware the support channels must be perpendicular to
the trunk, now tighten all hardware.
Figure 8B
Advertising