Grain Systems PNEG-696 - Manual (Page 18)

Series 2000 Autoflow Operation
1 8
Fill System Control Box
The fill system control box houses the
motor starters for fill system #1, fill system #2 and
the aeration fan. Switches are located on the front
of the fill system control box, and an emergency
stop switch is located on the side of the control box.
Fill System #1
This switch is used to start and stop fill
system #1 manually. The switch should be left in
the “auto” position for normal dryer operation. If
the switch is placed in the “off” position fill system
#1 will not start, and will stop if running. If the
dryer control power is on, fill system #1 can be
activated by placing the switch in the “on” position.
When placed in the “on” position, fill system #1 will
operate continuously.
FILL SYSTEM CONTROL BOX
Fill System #2
This switch is used to start and stop fill system
#2 manually. The switch should be left in the “auto”
position for normal dryer operation. If the switch is
placed in the “off” position fill system #2 will not start,
and will stop if running. If the dryer control power is
on, fill system #2 can be activated by placing the switch
in the “on” position. When placed in the “on” position,
fill system #2 will operate continuously.
Aeration Fan
This switch is used to start and stop the aera-
tion fan manually. The switch should be left in the
“auto” position for normal dryer operation. If the
switch is placed in the “off” position the aeration fan
will not start, and will stop if running. If the dryer
control power is on, the aeration fan can be activated
by placing the switch in the “on” position. When placed
in the “on” position, the aeration fan will operate
continuously.
Emergency Stop Switch
This switch will stop the dryer when pushed,
and should be used in case of emergency.