Assembly instructions, Platform support installation – Grain Systems Bin Accessories PNEG-1846 User Manual
Page 19
![background image](/manuals/277842/19/background.png)
4. 105' Diameter Exhaust Walk Around Package
PNEG-1846 “X” Series Complete 105' Walk Around Manual
19
Assembly Instructions
1. The exhaust walk around package has been structured with the correct components for installation
in the upper roof assembly of a 105' diameter tank. Be sure and follow the complete instruction
sheets for correct placement of parts. Failure to do so may result in improper fit of parts or shortage
of parts.
Figure 4B
Platform Support Installation
1. To begin the exhaust walk around installation, attach one platform support (LDR-4426) to each roof rib
in the upper roof assembly. The platform supports should be installed in the 1
st
and 2
nd
holes from the
bottom of the roof rib using 5/16" x 1-1/4" bolts supplied in the roof hardware package.
Figure 4C