Grain Systems Bin Accessories PNEG-1846 - Manual (Page 20)

4. 105' Diameter Exhaust Walk Around Package
20 PNEG-1846 “X” Series Complete 105' Walk Around Manual
Platform Installation
1. Attach each platform (STX-0334) to the platform supports (LDR-4426) using 5/16" x 1-1/4" bolts
(S-277). Leave bolts loose until all platforms are installed to ensure proper fit. Install counterclockwise
to cover tabbed portion of platform.
(See Figure 4D.)
Figure 4D
Handrail Post Installation
1. Attach the handrail post to the platform support three (3) places and to the platform one place using
5/16" x 1-1/4" bolts (S-277). Make sure the head of the bolt is installed to the inside of the platform
as shown in
Figure 4E .
Figure 4E