Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNOT-454 - Manual (Page 2)

PRODUCT NOTIFICATION
PNOT‐454
GSI GROUP • 1004 E. Illinois St. • Assumption, IL 62510 USA • 888‐GSI‐BINS • Fax: 800‐800‐5329 Page 2 of 15
Support Channels and Knee Braces
Assemble clamps securely to the trunk, attach the platform support channel (DSP36005) to the upper
clamp using 1/2" hardware. Insert rod (DSP36008) through middle hole in the bracket, attached to the
platform support channel using 5/8" hex nut (S‐4110), 5/8" lock washer (S‐3208) and two (2) 5/18" flat
washers (S‐858). The knee braces will attach in the upper set of holes on side of support channels using
1/2" hardware.
(See Figure 2.)
Figure 2