Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNOT-454 - Manual (Page 9)

PRODUCT NOTIFICATION
PNOT‐454
GSI GROUP • 1004 E. Illinois St. • Assumption, IL 62510 USA • 888‐GSI‐BINS • Fax: 800‐800‐5329 Page 9 of 15
Tie Braces
IMPORTANT:
For safety purposes, make sure head of bolts are to the inside of platform with nuts on
outside at all connections.
NOTE: Safety cage bars are used as tie braces in this installation.
Between each of the three (3) “W” corner posts (HP1648HWP), platform post (HP1648HCP) and safety
gate side post (HP1648HP), attach two (2) tie braces (safety cage bar (LDR‐5171BE)) from the lower half
of the post to toe boards using 5/16"‐18 x 3/4" ZN grade 5 bolts (S‐6606) and 5/16"‐18 YDP grade 2
flange nut (S‐3611).
(See Figure 9.)
Figure 9