Grain Systems Bin Accessories PNEG-1614 - Manual (Page 12)

2. Installation
12 PNEG-1614 Heavy Duty Bin Stairs and Platform Assembly for 2.66" Corrugated Bin
2. Figure 2I shows the assembly of the stair bracing. As shown before in Figure 2C on Page 8 , the first
vertical wall bracket will be located two (2) bolt spaces or 18-3/4" around the bin. 3/8" Hardware is
used at the four (4) connection points as shown. The outer two (2) mounting holes on the side and
the outer middle hole on the top of the horizontal wall bracket will be used to attach the step as shown
in
Figure 2J .
Figure 2I Stair Bracing Inside View
Figure 2J Stair Bracing Outside View