Grain Systems PNEG-1754 - Manual (Page 18)

1. Installation
18 PNEG-1754 Tower Dryer Ladder Installation Instructions
Ladder Assembly (Continued)
3. Assemble one set of ladder standoffs (LDR-4314) per each overlap near the base as shown in
Figure 1Q on Page 19 . Assemble two (2) hopper ladder supports (LSCHT-1003) between the legs,
to support the ladder as shown in Figure 1Q on Page 19 . Assemble the ladder with hopper supports
(LSCHT-1003) using two (2) ladder standoff (LDR-4314) brackets.
Figure 1P