Grain Systems PNEG-1754 - Manual (Page 8)

1. Installation
8 PNEG-1754 Tower Dryer Ladder Installation Instructions
Ladder Assembly
1. For the ladder assembly (Figure 1F) , first assemble the ladder starting brackets (LDR-4346 and
LDR-4347) at the roof band. Assemble the right hand ladder starting bracket (LDR-4347) at the first set
of holes on the left from where two (2) roof bands overlap as shown in
Figure 1F . Assemble the left
hand ladder starting bracket (LDR-4346) at the set of holes, which are about 17" left of the first set of
holes as shown in
Figure 1F . Attach the ladder stiffeners (GT1-0156L-XX and GT1-0156R-XX) to the
vertical channels and assemble the ladder with these brackets as shown in Figure 1G on Page 9 . Make
sure the ladder will extend up 6' from roof hatch platform door. Also, make sure the ladder rung will be
aligned with the roof hatch platform door.
Figure 1F