Grain Systems Tanks PNEG-4042 - Manual (Page 62)

6. Stiffeners
62 PNEG-4042 40 Series 42' and 48' Diameter Bins
Close-Punch Laminated Base Stiffener (2 Gauge) with Insert
(2+14 to 2+10 Gauge) to a Base Boot
Refer to the following information when connecting a close-punch laminated base stiffener
(CTS-2114XX) to a base boot (CTS-2109XX or CTS-2110XX).
(See Figure 6Y.)
Figure 6Y Close-Punch Laminated Base Stiffener to a Base Boot
NOTE: 2 Post stiffeners shown. The bolt pattern will vary for 3 post. Only place bolts where holes in the
stiffeners align with holes in the sidewall sheet.
Ref # Part # Description
A CTS-2114XX Close-Punch Laminated Base Stiffener
B CTS-2113XX Close-Punch Base Insert
C
CTS-2109XX or
CTS-2110XX
Close-Punch Base Boot
D S-7485 Flange Bolt 3/8"-16 x 1" JS Grade 8 or Grade 8.2
E S-9426 Flange Nut 3/8"-16 JS
F Completed Assembly