Cobalt Digital COMPASS 9082 HD_SD Frame Sync - Manual (Page 24)

2
Installing a Rear I/O Module
2-4 9082 PRODUCT MANUAL 9082-OM (V4.4)
Figure 2-1 Rear I/O Module Installation
9082 Rear I/O Modules
Table 2-1 shows and describes the full assortment of Rear I/O Modules
specifically for use with the 9082.
DSCN3483A.JPG
Align and engage mounting tab on Rear
I/O Module with the module seating slot
on rear of frame chassis.
Hold top of Rear I/O Module flush against
frame chassis and start the captive screw.
Lightly tighten captive screw.
DSCN3487A.JPG
1
2