Checking 9082 card information, Checking 9082 card information -7, Checking 9082 card information (p. 3-7) – Cobalt Digital COMPASS 9082 HD_SD Frame Sync User Manual

Page 33: Operating instructions

Advertising
background image

9082-OM (V4.4)

9082 PRODUCT MANUAL

3-7

Operating Instructions

Checking 9082 Card Information

Checking 9082 Card Information

The operating status and software version the 9082 card can be checked using
DashBoard™ or the card edge control user interface. Figure 3-4 shows and
describes the 9082 card information screen using DashBoard™ and accessing
card information using the card edge control user interface.

Note:

Proper operating status in DashBoard™ is denoted by green icons for the sta-
tus indicators shown in Figure 3-4. Yellow or red icons respectively indicate
an alert or failure condition. Refer to Troubleshooting (p. 3-22) for corrective
action.

Figure 3-4 9082 Card Info Utility

The Tree View shows the cards seen by DashBoard™.
In this example, Network Controller Card MFC-8320-N
(serial number ...8053) is hosting a 9082 card in slot 6.

Software Version Number
Refer to this number to check that documentation
(such as this manual) matches the card’s Software
Version Number. Use this number also when
communicating to Cobalt

®

regarding this card.

Status Displays

These displays show the status the signal being received by
the 9082. Green Settings icon shows that any changes made
on DashBoard™ are sucessfully saved on the card’s memory.

Power Consumption and Temperature Displays
This display shows the power consumed by the 9082
for both the +12V and -7.5V rails, as well as key device
temperatures.

Advertising