Cobalt Digital COMPASS 9082 HD_SD Frame Sync - Manual (Page 32)

3
Accessing the 9082 Card via Remote Control
3-6 9082 PRODUCT MANUAL 9082-OM (V4.4)
Accessing the 9082 Card Using a Cobalt ® Remote Control Panel
Press the Select Device key and select a card as shown in the example below.
Card Access/Navigation
Tree Pane
Card Info
Pane
Card Function Submenu
and Controls Pane
This display shows the list
order number of the device that
is ready for selection
This display shows the devices assigned to the Control Panel.
• Rotate any knob to select from the list of devices. The device selected using a knob
is displayed with a reversed background (in this example,
“1 9082 - Receiver 21 Input Processing”).
• Directly enter a device by entering its list number using the numeric keypad, and
then pressing Enter or pressing in any knob).