Cobalt Digital COMPASS 9086 Embedded Audio Loudness Processor - Manual (Page 32)

3
Control and Display Descriptions
3-4 9086-SD PRODUCT MANUAL 9086-OM (V4.3)
Cobalt ® Remote Control Panel User Interfaces
(See Figure 3-3.) Similar to the function submenu tabs using DashBoard™,
the OGCP-9000 (and OGCP-9000/CC) Remote Control Panels have a Select
Submenu key that is used to display a list of function submenus. From this
list, a control knob on the Control Panel is used to select a function from the
list of displayed function submenu items.
When the desired function submenu is selected, each parametric control or
selection list item associated with the function is displayed. Scalar (numeric)
parametric values can then be adjusted as desired using the control knobs,
which act like a potentiometer. Items in a list can then be selected using the
control knobs which correspondingly act like a rotary switch.
Figure 3-3 shows accessing a function submenu and its parameters (in this
example, “Embedded Audio Output Group 1/2”) using the Control Panel.
Note: Refer to “OGCP-9000 Remote Control Panel User Manual” (PN
OGCP-9000-OM) or “OGCP-9000/CC Remote Control Panel User Manual”
(PN OGCP-9000/CC-OM) for complete instructions on using the Control
Panels.
Figure 3-3 Control Panel Setup of Example Audio Control Function Setup
Embedded Audio Group 1/2
function (among others) is
accessed using the Control
Panel Select Submenu key.
Embedded Audio Group 1/2
function is selected from the
list of functions (submenu
items) using any knob
9305_CP2A.PNG
OGCP_GEN.JPG
Ch 1 Gain
20.0 dB
Ch 3 Gain
0.0 dB
Ch 2 Gain
0.0 dB
Ch 1 Gain
0.0 dB
When the Embedded Audio
Group 1/2 function submenu
is selected, its related
parameters are now
displayed.
In this example, Gain for
Embedded Channel 1 is
adjusted using the
corresponding Gain control
knob.