Accessing the 9086 card via remote control, Accessing the 9086 card using dashboard, Accessing the 9086 card via remote control -5 – Cobalt Digital COMPASS 9086 Embedded Audio Loudness Processor User Manual
Page 33: Accessing the 9086 card using dashboard™ -5, Operating instructions
![background image](/manuals/279997/33/background.png)
9086-OM (V4.3)
9086-SD PRODUCT MANUAL
3-5
Operating Instructions
Accessing the 9086 Card via Remote Control
Accessing the 9086 Card via Remote Control
Access the 9086 card using DashBoard™ or Cobalt
®
Remote Control Panel
as described below.
Accessing the 9086 Card Using DashBoard™
1.
On the computer connected to the frame LAN, open DashBoard™.
2.
As shown below, in the left side Basic View Tree locate the Network
Controller Card associated with the frame containing the 9086 card to be
accessed (in this example, “MFC-8320-N SN: 00108053”).
3.
As shown below, expand the tree to access the cards within the frame.
Click on the card to be accessed (in this example,
“Slot 7: CDI-9086”).
.
As shown on the next page, when the card is accessed in DashBoard™
its function submenu screen showing tabs for each function is displayed.
(The particular submenu screen displayed is the previously displayed
screen from the last time the card was accessed by DashBoard™).
DB_ACCESS1.PNG
9086_DB_ACCESS2A.PNG