Cobalt Digital COMPASS 9086 Embedded Audio Loudness Processor - Manual (Page 34)

3
Accessing the 9086 Card via Remote Control
3-6 9086-SD PRODUCT MANUAL 9086-OM (V4.3)
Accessing the 9086 Card Using a Cobalt ® Remote Control Panel
Press the Select Device key and select a card as shown in the example below.
Card Access/Navigation
Tree Pane
Card Info
Pane
Card Function Submenu
and Controls Pane
9086_DB_ACCESS3A3.PNG
This display shows the list
order number of the device that
is ready for selection
This display shows the devices assigned to the Control Panel.
• Rotate any knob to select from the list of devices. The device selected using a knob
is displayed with a reversed background (in this example, “1 9086 - Post 1A
Loudness Processing”).
• Directly enter a device by entering its list number using the numeric keypad, and
then pressing Enter or pressing in any knob).
9086_3366_3392.JPG