Troubleshooting, Error and failure indicator overview, Troubleshooting -33 – Cobalt Digital COMPASS 9086 Embedded Audio Loudness Processor User Manual
Page 61: Error and failure indicator overview -33, Troubleshooting (p. 3-33), Operating instructions
9086-OM (V4.3)
9086-SD PRODUCT MANUAL
3-33
Operating Instructions
Troubleshooting
Troubleshooting
This section provides general troubleshooting information and specific
symptom/corrective action for the 9086 card. The 9086 card requires no
periodic maintenance in its normal operation; if any error indication (as
described in this section) occurs, use this section to correct the condition.
Error and Failure Indicator Overview
The 9086 card itself and its remote control systems all (to varying degrees)
provide error and failure indications. Depending on how the 9086 card is
being used (i.e, standalone or network controlled through DashBoard™ or a
Remote Control Panel), check all available indications in the event of an error
or failure condition.
The various 9086 card and remote control error and failure indicators are
individually described below.
Note:
The descriptions below provide general information for the various status and
error indicators. For specific failures, also use the appropriate subsection
listed below.
• Basic Troubleshooting Checks (p. 3-37)