9086 functional description, 9086 input/output formats, 9086 input/output formats -5 – Cobalt Digital COMPASS 9086 Embedded Audio Loudness Processor User Manual
Page 9: 9086 functional description (p. 1-5), Introduction
9086-OM (V4.3)
9086-SD PRODUCT MANUAL
1-5
Introduction
9086 Functional Description
9086 Functional Description
Figure 1-1 shows a functional block diagram of the 9086. The 9086 loudness
processor also includes a full 16-channel audio crosspoint. The 9086 also
handles AFD code detection/insertion and timecode insertion/format
conversion.
Note:
Some of the functions described below are available only when using the
DashBoard™, or Cobalt
®
OGCP-9000 or OGCP-9000/CC Remote Control
Panels user interfaces. Refer to User Control Interface (p. 1-12) for user inter-
face descriptions.
9086 Input/Output Formats
The 9086 provides the following inputs and outputs:
•
Inputs:
•
SDI IN
– SD-SDI input
•
Outputs:
•
SDI OUT
– four SD-SDI buffered video outputs)
•
RCK OUT
– four reclocked SD-SDI buffered input copies)
Note:
The input/output complement listed above represents the maximum capability
of the 9086. The practical input/output complement is determined by the par-
ticular Rear I/O Module used with the 9086. Refer to 9086 Rear I/O Modules
(p. 1-14) for more information.