9064 rear i/o modules -14, Video formats supported by the 9064 -14 – Cobalt Digital COMPASS 9064 Up_Down_Cross Converter User Manual
Page 18
1
9064 Functional Description
1-14
9064 PRODUCT MANUAL
9064-OM (V4.1)
9064 Rear I/O Modules
The 9064 physically interfaces to system video connections at the rear of its
frame using a Rear I/O Module.
All inputs and outputs shown in the 9064 Functional Block Diagram (Figure
1-1) enter and exit the card via the card edge backplane connector. The
Rear I/O Module breaks out the 9064 card edge connections to BNC
connectors that interface with other components and systems in the signal
chain.
These required BNC connections are provided by either an 8310-BNC or
8310-C-BNC frame (which both have a built-in BNC connector backplane
module), or by using an optional RM20-9064-A Rear I/O Module.
Video Formats Supported by the 9064
The 9064 supports all current SMPTE standard SD and HD video formats.
Table 1-2 lists and provides details regarding the video formats supported by
the 9064.
Table 1-2
Supported Video Formats
Item
Description/Specification
Input / Output Video
Raster Structure:
Frame Rate:
1080PsF
23.98; 24
1080p
23.98; 24
1080i
(1)
25; 29.97; 30
720p
23.98; 24; 25; 29.97; 30; 50; 59.94;
60
486i
(1)
29.97
575i
(1)
25
(1) All rates displayed as frame rates; interlaced (“i”) field rates are two times the rate value shown.