TC Electronic FireworX - Manual (Page 9)

ARROW KEYS
In many of the displays you can select
different pages by pressing the Arrow
keys, e.g. in the Effects display you can
choose between Tool, Edit, Routing and
Layout.
THE PARAMETER WHEEL
Use the Parameter wheel to change
position of the cursor in the display
THE VALUE WHEEL
Use the Value wheel to change the
values of parameters.
ENTER, EXIT
The Enter key is used to confirm actions,
or for accessing into a block. The Enter
key will blink when the FireworX needs
you to confirm.
The Exit key is used to exit a menu, or to
cancel an action.
7
INTRODUCTION The Front Panel
EFFECT MUTE
The twelve effect keys are
dedicated to mute/bypass
any of the twelve effect
blocks. These keys can
mute/bypass an effect
block at any time, no
matter what display you
are working in.
When you are in the
Effects Edit display,
double click for fast
access to the Edit
parameter menu. ALPHA MOD.
The Alpha modulation
wheel can control a
number of parameters at
the same time. The specific
function of the wheel is
following the preset.
The function of the Alpha
Mod. is set up in the
Modifier Matrix.
ALPHA WHEEL METER
Is indicating the actual
output value of the Alpha
Mod. wheel