TC Electronic Broadcast 6000 - Manual (Page 36)

VSS™ 3
32 System 6000 MKII Algorithms
Out Level
Range: -100 dB to 0 dB
The overall Output level of the Reverb. This is
mostly used when the algorithms used in Serial
with other Engines.
VSS™ 3 algorithm – early page
VSS™ 3 algorithm – early page
Early Type
Several types are available – e.g. Bathroom, Car
etc.
Pick the type that best compliments your materi-
al or best represents the effect you are going for.
Early Color
Range: -40/+40
Adjusts the spectral balance in the high end fre-
quencies.
This is actually a simple way of adjusting a com-
plex selection of frequencies.
Early Pos
Here you can select between a Close and a Dis-
tant setting.
This enables you to change the distance be-
tween the listening position and the source in the
same Early Reflection pattern.
Please note that some of the Early Types only
have one position available.
Early Size
Range/Type: Small, Medium or Large
Changes the size of the Early Type parameter.
Some of the Early Types are one size.
Early Lo Cut
Range: Off to 400 Hz
Sets the Lo Cut frequency for the Early Reflec-
tions.
Early Balance
Range: -100 dB R, Center, -100 dB L
The left/right balance of the Early Reflections. Al-
lows you to offset the Early Reflections from the
normal center position.
VSS™ 3 algorithm – reverb page
VSS™ 3 algorithm – reverb page
Reverb
Rev Type
Range: Smooth, Natural, Alive,
Fast, Fast Wd, Alive Wd
Adjust this parameter with the Early Level turned
all the way off and the Rev Level all the way up.
Change the type to get a feel of what each one
sounds like.
Rev. Width
Range: Wide, Stereo, Center or Mono
With this parameter you can change the width of
the diffuse field. The Mono setting is where the
left and right Reverb Tails are completely iden-
tical, the Center setting opens a bit up in the