TC Electronic Broadcast 6000 - Manual (Page 56)

VSS™ M4
52 System 6000 MKII Algorithms
VSS™ M4 algorithm – levels page
VSS™ M4 algorithm – levels page
In Level (Reverb 1 to 4)
Range: Off to 0 dB
Individual input level of the four reverbs. If the in-
put signal is close to full scale and/or long decay
times are used, it may be necessary to attenuate
the input to avoid overload.
Reverb Level (Reverb 1 to 4)
Range: Off to 0 dB
Individual reverb (wet) level of the four reverbs.
Note: This parameter is also available on the
Rev.1 to 4 sub pages.
Dry Level (Reverb 1 to 4)
Range: Off to 0 dB
Individual dry signal level of the four reverbs.
In send/return configurations, the parameter
should be set to Off.
Output Level (Reverb 1 to 4)
Range: Off to 0 dB
Individual output level of the four reverbs.
VSS™ M4 algorithm –
reverb pages 1 to 4
VSS™ M4 algorithm – reverb pages 1 to 4
Reverb
Master Decay (Reverb 1 to 4)
Range: 0.1 to 20 s
Individual Decay parameters of the four reverbs.
This parameter is also available on the Main
page.
Reverb Diffuse
Range: -50 to +50
This parameter offsets the diffusion away from
what is considered optimum for a given Decay
time.
Build
Range: Fast, Slow
Selects the speed of the build-up (ie. attack) of
the reverb.
Reverb Type (Reverb 1 to 4)
Select between different reverb types for each
of the four reverbs. By selecting different types
or different version (A, B, C, D), de-correlated re-
sponses are ensured.
This parameter is also available on the Main
page.